On Our Radar｜Tamlyn XtremeCoat - Urethane Roof Coating - Pallet of 36 Units (5 Gallon Units)｜ Other Products

Tamlyn® XtremeCoat is a high-performance, two-component hybrid urethane waterproofing coating designed to deliver long-term protection for roofing, waterproofing, and structural surfaces.

PROPERTIES
VALUE

COLOR
White/Grey (other colors available on request)

MIXED DENSITY, (G/L)
1.1±0.05

SOLID CONTENT, (%)
65±2

POT LIFE, (HRS)
6

VOC, (G/L)
<10

TOUCH DRY TIME, (MINS)
25

INITIAL CURE TIME, (MINS)
60

FULL CURE, (HRS)
24

TENSILE STRENGTH, (N, MM²)
≥2.5

ELONGATION, (%)
≥250

TEAR STRENGTH, (N, MM)
≥10

SOLAR REFLECTION, (%) (WHITE)
≥75

SHORE A HARDNESS
45

WATER VAPOR TRANSMISSION, (PERMS)
6

ADHESION STRENGTH, (N, MM²)
≥2.5

CRACKING BRIDGING ABILITY, (MM)
≥2

APPLICATION TEMPERATURE, (°C)
5 to 45

SERVICE TEMPERATURE, (°C)
-5 to 70

Engineered for strong adhesion, fast curing, and high flexibility, XtremeCoat forms a seamless, elastomeric membrane that helps protect against water intrusion, UV exposure, and environmental stress.
This advanced coating is formulated to bond to a wide range of substrates, including concrete, metal, modified bitumen, SPF foam, PVC, TPO, EPDM, plywood, and existing roofing systems. Its ability to adhere to damp and properly prepared surfaces makes it especially valuable for restoration and maintenance projects where downtime must be minimized.
Once cured, XtremeCoat creates a durable, weather-resistant barrier with excellent elongation and crack-bridging capability, allowing it to accommodate normal structural movement without compromising waterproof integrity. It is commonly used in commercial roofing systems, waterproofing applications, water containment structures, and below-grade protection projects.

Key Features & Benefits

Fast-curing hybrid urethane waterproofing system
Seamless, fully bonded membrane protection
Excellent adhesion to a wide range of substrates
UV resistant and weather durable finish
High elongation for crack-bridging performance
Resistant to ponding water conditions
Low VOC formulation for safer application
Can be applied over properly prepared damp surfaces
Suitable for roofing, waterproofing, and restoration work
Long-term durability in demanding environments

Recommended Applications
XtremeCoat is used across commercial, industrial, and residential waterproofing projects, including:

Flat and low-slope roofing systems
Metal roofs and roof restorations
Concrete decks and structures
Modified bitumen roofing systems
SPF (spray polyurethane foam) roofing
EPDM, PVC, and TPO roofing membranes
Waterproofing balconies and walkways
Below-grade waterproofing applications
Retaining walls and foundation protection
Water containment and drainage structures
Plaza decks and pedestrian surfaces

Technical Data (Summary)

Product Type: Two-component hybrid urethane coating
Appearance: Liquid-applied waterproofing membrane
VOC Content: Low VOC formulation
Cure Time: Rapid initial set with full cure within 24–48 hours (depending on conditions)
Application Method: Roller, brush, or spray (as specified in system guide)
Film Formation: Seamless elastomeric membrane
Service Life: Long-term waterproofing protection when properly installed

Performance Characteristics

High tensile strength for structural durability
Strong elongation for movement accommodation
Excellent adhesion to multiple roofing and construction materials
UV and weather resistance for exterior exposure
Crack-bridging ability for dynamic substrates
Water resistance including ponding conditions
Flexible membrane performance after full cure

Installation Overview

Apply over properly prepared and cleaned substrates
Suitable primers may be required depending on surface type
Typically installed in multiple coats for uniform coverage
Reinforcement fabric may be used in critical areas (penetrations, seams, transitions)
Application rates vary based on substrate and system requirements
Full system performance depends on correct surface preparation and installation conditions

Storage & Handling

Store in a cool, dry environment
Keep containers tightly sealed when not in use
Protect from freezing and excessive heat
Follow manufacturer guidelines for shelf life and handling

Safety Information (SDS Summary)

Use standard PPE during application (gloves, eye protection, and protective clothing recommended)
Ensure adequate ventilation during use
Avoid prolonged skin contact
In case of eye or skin contact, rinse thoroughly with water
Refer to official Safety Data Sheet (SDS) for complete handling and emergency procedures
Product is typically classified as low hazard under normal use conditions when properly handled

Technical Documentation
Tamlyn provides full technical documentation for XtremeCoat, including:

Technical Data Sheet (TDS) with full performance specifications and installation requirements
Safety Data Sheet (SDS) covering handling, hazards, and first aid measures
System installation guides and approved application methods
Specification guidance for commercial and industrial roofing systems

These documents outline proper usage requirements, system build-ups, and performance expectations for qualified installers and contractors.
Brand:TamlynSKU:XCACTags:Roof Sealer, Sealers, Urethane Roof Coating