Other Products ｜Wood's Powr-Grip MRTA Multi-Position Pad Arms Compact Production Lifter

Wood's Powr-Grip MRTA Multi-Position Pad Arms Compact Production Lifter — Versatile Vacuum Lifting for High-Volume Material Handling
The Wood's Powr-Grip MRTA Compact Production Lifter Series is a professional-grade vacuum lifter engineered for contractors and trades professionals who need to handle heavy, varied materials in rapid succession. Available in 4-pad and 6-pad configurations with AC (electric outlet) or compressed air power options, these lifters accommodate a wide range of load shapes and sizes without sacrificing cycle speed or operator safety. With a maximum load capacity of 300 lbs (135 kg) on the 6-pad model and 200 lbs (90 kg) on the 4-pad model, the MRTA series is built for demanding production environments where both throughput and precision matter. This product is sold exclusively through Authorized Dealers.
What sets the MRTA series apart from fixed-pad vacuum lifters is its combination of adjustable pad arms and an integrated tilt-assist mechanism, allowing a single operator to reposition and tilt heavy loads securely without manual strain. Unlike standard lifters that require load-specific tooling changes, the MRTA's configurable pad layout adapts on the fly to different material geometries, reducing downtime between lifts and improving overall jobsite efficiency.

Key Features & Benefits

Adjustable Multi-Position Pad Arms
The MRTA series features repositionable pad arms that can be configured to match a wide variety of material shapes and sizes, eliminating the need for dedicated tooling per load type. For contractors working with mixed material runs, this adaptability dramatically reduces setup time between lifts. Both 4-pad and 6-pad configurations offer this flexibility, letting crews dial in the optimal contact pattern for each application.

Tilt-Assist Mechanism
An integrated tilt-assist system enables secure, controlled tilting of heavy loads, reducing operator effort and the risk of load shifting during repositioning. This feature is especially critical when rotating panel materials from horizontal to vertical orientations on the jobsite. The tilt linkage is designed to maintain load stability throughout the tilting arc, giving operators confidence when handling near-capacity loads.

Dual Power Options: AC and Compressed Air
Each configuration is available in either AC (electric outlet) or compressed air power, allowing crews to match the lifter to the available infrastructure at their worksite. AC-powered models connect directly to a standard electric outlet via cord, while compressed air models integrate with existing pneumatic systems common in production and fabrication environments. This flexibility means the MRTA series can be deployed across a broader range of jobsite conditions without additional power infrastructure investment.

High Load Capacity for Production Use
The 6-pad models handle loads up to 300 lbs (135 kg), while the 4-pad models are rated to 200 lbs (90 kg), covering the weight ranges most commonly encountered in glass, panel, and stone installation work. These ratings support true production-pace lifting without requiring operators to downgrade load sizes for safety margins. The robust vacuum system maintains reliable hold even when working near rated capacity.

Compact Production-Class Design
The MRTA series is purpose-built for production environments where speed, repeatability, and maneuverability all matter. The compact form factor allows use in tighter spaces compared to full-frame industrial lifters, while still delivering the performance characteristics professionals require. This makes the MRTA well-suited for both shop floor fabrication and on-site installation workflows.

Optional Vacuum Loss Warning Buzzer (Stock# 93781)
An available accessory, the Vacuum Loss Warning Buzzer (Stock# 93781) provides an audible alarm when a load is at risk of detaching from the pads, giving operators and nearby workers advance warning before a potential drop event. This safety add-on is strongly recommended for applications involving overhead lifting or loads positioned above personnel. It integrates directly with the lifter's vacuum monitoring system for real-time hazard notification.

Common Applications

Glass Panel Installation
The MRTA's vacuum pads grip smooth glass surfaces securely, allowing contractors to lift, rotate, and tilt large glass panels into framing or curtainwall systems without manual handling risks.

Stone and Tile Slab Handling
For countertop fabricators and tile installers, the adjustable pad arms accommodate irregular slab dimensions, enabling efficient repositioning of heavy stone pieces during cutting, finishing, and installation.

Composite and Solid Surface Panels
The MRTA handles composite cladding panels and solid surface sheets, allowing crews to lift and orient large format panels for exterior facade or interior wall installation work.

Woodworking and Cabinetry Production
In millwork shops and cabinetry production lines, the adjustable pad configuration lets operators quickly adapt between different sheet sizes, reducing manual handling fatigue during high-volume runs.

Aluminum and Metal Sheet Handling
Smooth and lightly textured metal sheets used in architectural or HVAC applications can be lifted and repositioned efficiently using the MRTA's vacuum system, supporting both fabrication and field installation tasks.

Prefabricated Panel and Modular Construction
The tilt-assist capability makes the MRTA particularly effective when tilting prefabricated wall panels or modular construction components from transport orientation into final installation position.

Compatible Materials

Float glass and tempered glass
Laminated glass panels
Natural stone slabs (granite, marble, limestone)
Engineered stone and quartz surfaces
Ceramic and porcelain tile sheets
Composite cladding and facade panels
Solid surface materials
MDF, plywood, and wood sheet goods
Aluminum and steel sheet metal
Prefabricated modular wall panels

Product Documents

Operating Instructions (MRTA4LP6FAC / MRTA6LP6FAC)
Service Manual — AC-Voltage Power System
Troubleshooting Guide — Vacuum Leak Test
Specifications Sheet — MRTA Series
Instructions — Vacuum Loss Warning Buzzer (Option, Stock# 93781)
Specifications — Vacuum Loss Warning Buzzer (Option, Stock# 93781)

Application Instructions

Stage 1: Pre-Operation Setup and Inspection

Read and fully understand the Operating Instructions before using the lifter. This equipment is intended for use by professional equipment operators only.
Inspect the lifter prior to each use, including vacuum pads, pad arms, tilt actuator, vacuum gauge, air filter, and all connections.
Perform a Vacuum Test and Rated Load Test as described in the Inspections and Tests section of the Operating Instructions before resuming normal operation after any service or inspection deficiency.
Verify that the power source (AC outlet or compressed air supply) is appropriate for the model being used and is functioning correctly.
Confirm the air filter bowl is free of liquid and contaminants. Remove any moisture or debris immediately to prevent contact with the filter element.

Stage 2: Configuring the Pad Arms

Identify the shape, size, and surface characteristics of the load to be lifted.
Adjust the movable pad arms to positions that distribute vacuum contact evenly across the load surface, following the pad positioning guidance in the Operating Instructions.
Ensure all pad arm positions are locked securely before proceeding to attach the lifter to the load.

Stage 3: Attaching the Pads to the Load

Activate the power source to generate airflow through the vacuum system.
Position the lifter squarely onto the load surface, ensuring all pads make full, even contact with a smooth, non-porous area of the material.
Monitor the vacuum gauge to confirm that sufficient vacuum level has been achieved for safe lifting. Do not proceed if the gauge reading is below the minimum required level.
Perform a Lifter/Load Compatibility Test as described in the Operating Instructions to verify the load can be safely handled before full lifts are attempted.

Stage 4: Lifting, Moving, Rotating, and Tilting the Load

With adequate vacuum confirmed, lift the load using the designated lift point. Monitor the vacuum gauge continuously during the lift.
To rotate the load, use the rotation release lever per the instructions, controlling movement smoothly to avoid shock loading on the vacuum system.
To tilt the load, engage the tilt toggle switch to actuate the linear tilt actuator. The tilt-assist mechanism supports controlled, safe tilting of heavy loads.
If a power failure occurs during lifting, follow the emergency procedures outlined in the Operating Instructions immediately.
Maintain continuous observation of the vacuum gauge throughout all movement. If vacuum loss is detected (or the optional Warning Buzzer sounds), lower the load to a safe surface immediately.

Stage 5: Releasing the Load and Post-Operation

Lower the load fully onto a stable, supported surface before releasing vacuum.
Release the pads from the load using the vacuum release button (or lever-style vacuum control valve, depending on model configuration).
Power down the lifter and disconnect from the power source as appropriate.
Inspect pads and pad arms after use. Store the lifter in a clean, protected location per the storage guidance in the Operating Instructions.
When transporting the lifter, secure it per the transporting guidelines to prevent damage to pads, arms, or the vacuum system.

Technical Specifications

Specification
Details

Series
MRTA Compact Production Lifter Series

Pad Configuration Options
4-pad or 6-pad

Max Load Capacity — 6-Pad Models
300 lbs (135 kg)

Max Load Capacity — 4-Pad Models
200 lbs (90 kg)

Power Options
AC (electric outlet with cord) or Compressed Air

Tilt Mechanism
Tilt-assist with linear tilt actuator for secure, efficient tilting of heavy loads

Pad Arms
Adjustable multi-position; accommodates various shapes and sizes

Rotation
Yes — rotation release lever

Vacuum Monitoring
Vacuum gauge; optional Vacuum Loss Warning Buzzer (audible alarm)

Air Filtration
Integrated air filter (1 oz or 4.4 oz bowl size, model-dependent)

Vacuum Pump Models
Model 0523 or Model MP27 (model-dependent)

Control Interface
Movable control pendant with tilt toggle switch and vacuum release button

Available Models
MRTA6LP6FAC (Stock# 97456AR) — 6-pad, AC-poweredMRTA6LP6FAIR (Stock# 97457AR) — 6-pad, compressed airMRTA4LP6FAC (Stock# 97445AR) — 4-pad, AC-poweredMRTA4LP6FAIR (Stock# 97446AR) — 4-pad, compressed air

Optional Accessory
Vacuum Loss Warning Buzzer (Stock# 93781) — audible alarm on vacuum loss

Sales Channel
Sold through Authorized Dealers only

Manufacturer
Wood's Powr-Grip Co., Inc. — Laurel, MT, USA

Intended Users
Professional equipment operators

Safety Data Summary

Hazard Information

Risk of load detachment if vacuum level drops below minimum safe threshold during operation — monitor vacuum gauge continuously.
Electrical shock hazard on AC-powered models — disconnect power source before performing any service or maintenance.
Crushing and impact hazard if load is released or drops unexpectedly during lifting or tilting operations.
Do not operate lifter with damaged pads, pad arms, vacuum lines, or electrical connections.
Do not exceed rated load capacity for the model in use.
In case of power failure during a lift, follow emergency procedures in the Operating Instructions immediately — do not attempt to manually support the suspended load.
Air filter bowl must be kept free of liquid contamination to prevent pump damage and vacuum system failure.

Personal Protective Equipment

Safety footwear with toe protection required when operating or working near the lifter.
High-visibility vest recommended in shared workspaces or production floor environments.
Eye protection recommended when working with compressed air-powered models or performing maintenance tasks.
Gloves recommended when handling heavy materials assisted by the lifter.

Safe Handling

This equipment is intended for use by professional equipment operators only — read and fully understand the Operating Instructions before operating.
Service must only be performed by skilled technical professionals familiar with the Service Manual and Operating Instructions.
Perform all required pre-operation inspections and tests before each use, including the Lifter/Load Compatibility Test and Vacuum Test.
Never lift a load over personnel or in areas where a dropped load could cause injury or property damage.
Install and use the optional Vacuum Loss Warning Buzzer (Stock# 93781) for additional audible safety monitoring in high-risk lifting environments.
Store and transport the lifter per the guidelines in the Operating Instructions to prevent equipment damage between uses.
Any deficiency identified during inspection must be corrected and service completed before resuming normal operation.

Frequently Asked Questions

Q: What is the difference between the 4-pad and 6-pad MRTA models?A: The primary differences are load capacity and contact coverage. The 6-pad models (MRTA6LP6FAC and MRTA6LP6FAIR) support up to 300 lbs (135 kg), while the 4-pad models (MRTA4LP6FAC and MRTA4LP6FAIR) are rated to 200 lbs (90 kg). The 6-pad configuration also distributes vacuum force across a greater number of contact points, which can be advantageous when working with larger or more irregular load surfaces.

Q: Can I use the MRTA lifter on rough or porous surfaces?A: The MRTA series is designed for use on smooth, non-porous surfaces that allow the vacuum pads to form an airtight seal. Porous, heavily textured, or wet surfaces may prevent adequate vacuum from being achieved. Always perform the Lifter/Load Compatibility Test before attempting full production lifts on any new material type.

Q: Which power option should I choose — AC or compressed air?A: The right choice depends on your worksite infrastructure. AC-powered models connect to a standard electric outlet via cord and are well-suited for shops or sites with readily available electrical power. Compressed air models are ideal for production environments that already have a pneumatic supply system in place. Both power options deliver equivalent lifting performance within their rated capacities.

Q: Is the Vacuum Loss Warning Buzzer included with the lifter?A: No, the Vacuum Loss Warning Buzzer (Stock# 93781) is an optional accessory sold separately. It provides an audible alarm when vacuum drops to a level at which load detachment is at risk. It is strongly recommended for applications where loads are lifted overhead or in environments where personnel may be working in the vicinity of the lifter.

Q: Who is qualified to service the MRTA lifter?A: Service must be performed by skilled technical professionals who have read and fully understand both the Service Manual and the Operating Instructions — particularly the Inspections and Tests and Maintenance sections. Any deficiency found during routine inspection must be corrected before the lifter is returned to service. Disconnect all power sources before beginning any service procedures.

Q: Where can I purchase the MRTA Compact Production Lifter?A: The MRTA series is sold exclusively through Authorized Dealers. Contact Diamond Tool Store or your local authorized Wood's Powr-Grip dealer for pricing, availability, and model selection guidance.
Brand:Wood's Powr-GripSKU:97446ARTags:Adjustable Load Pallet Lifter, Call for Pricing, Recommendations disabled, Vacuum LiftersQuadra-Tilt Rotators 200 & 300:300 lbs [135 kg] - AC, 300 lbs [135 kg] - Air (Special Order), 300 lbs [135 kg] - DC (Special Order), 200 lbs [90 kg] - AC (Special Order), 200 lbs [90 kg] - Air (Special Order), 200 lbs [90 kg] - DC (Special Order)