Eco 100ml Refillable Ink Compatible Quick-drying Solvent Ink Refill Ink Tool Snap Fill for 12.7mm Handheld Inkjet Printer

SPECIFICATIONSApplicable Equipment: PrinterBrand Name: HumjihiroHigh-concerned chemical: noneOrigin: Mainland ChinaType: Cartridge Chip
Eco 100ml Refillable Ink Compatible Quick-drying Solvent Ink Refill Ink Tool Snap Fill for 12.7mm Handheld Inkjet Printer

The NOTE for the countries has 'Free Returns' service: We do not accept returns for no reason except quality problem. We can't receive the returned goods when you opened dispute to return. We only can choose to destroy it after you returned the goods to AliExpress local warehouse. It will be a big loss for our company. Please consult us before ordering if you don't know whether the product is suitable for you or not. So if you just want to try then return it, please don't make an order. Thank you for your cooperation.

Ink Type: Solvent fast drying Ink Colors: Black, red, blue, green, yellow, purple, invisible, white.Ink Capacity: 100ml

1.Please allow 1-2mm errors due to manual measurement.2.Due to the difference between different monitors, there are color differences, please take the real product as the standard.1.There is to fulfill the orders on a daily basis2.For the shipping is quickly3.No invoice or receipt included

Ink Refilling Methods

Ink can be refilled from the printhead or the pre-drilled hole.

Method One:1. Attach the ink extraction clip.2. With the printhead facing up, insert a needle (without the needle) into the interface.3. Eject air; repeat 2-3 times.4. Draw ink from the ink bottle using the syringe. Insert the syringe (without the needle) into the interface and slowly push the ink in, injecting approximately 35ml.5. Remove the ink extraction clip.6. Print the printhead onto thick paper to check the ink level. If it prints normally and the printhead does not overflow ink, it is ready for use in the machine.

Method Two:Some ink cartridges cannot be refilled from the printhead (fast-dry ink).This method can be used:1. There is a hole next to the printhead containing a steel ball.2. Use a screwdriver or scissors to push the steel ball into the ink cartridge.3. Inject about 35ml of ink into the cartridge using a syringe.4. Plug the ink filling hole with a rubber stopper.5. Attach the ink extraction clip.6. With the printhead facing upwards, insert a syringe (without a needle) into the interface to extract air. Repeat 2-3 times.

7. Remove the ink extraction clip.8. Print the printhead onto a thick paper towel to absorb the ink from the printhead surface.9. Print the printhead onto the thick paper towel to check the ink levels. If it prints normally and does not overflow ink, it is ready for use in the machine.
Brand:Spy-shop.comSKU:1005007529215686-12.7mm with RedColor:25.4mmwith Invisible, 25.4mm with White, 25.4mm with Yellow, 12.7mm with Red, 12.7mm with Black, 12.7mm with Green, 12.7mm with Purple, 25.4mm with Purple, 12.7mmwith Invisible, 12.7mm with White, 12.7mm with Yellow, 12.7mm with Blue, 25.4mm with Blue, 25.4mm with Green, 25.4mm with Red, 25.4mm with Black